工业串口数据光端机[FT-KEM3600]

工业串口数据光端机[FT-KEM3600]

1. 概述
       北亿纤通专业生产研发FT--KEM3600-1S(M工业数据光端机是业之科公司专为工业领域开发的工业级光电转换器系列中的一种,可以在严酷的工业电磁环境下工作,适用于各种工业数据接口(RS232、RS422、RS485)工业数据光端机通过光纤进行远距离及抗电磁干扰通讯,适合在中国不同地域温度环境中使用,为工业控制系统联网提供了方便、可靠的途径。

2. 特点
        ※  即插即用,无需额外配置。
        ※ 端口全线速收发数据。
        ※ 采用工业级元器件和专门设计,可在极端的温度范围内稳定工作,能适应工业现场恶劣的工作环境。
        ※ 数据支持RS232、RS422、RS485接口。
        ※ 多种光接口形式,支持单芯单模光纤。
        ※ 坚固而小巧精致的外形结构设计,具有一定的防护等级。
        ※ 提供卡轨式、壁挂式等安装方式,适用于不同的安装条件。

3. 技术指标
    光口
        数         量:   1
        发送光功率:   ≥-15 dBm(SM)
        接收灵敏度:   <-35 dBm(SM)
        接口形式  :   SC/FC/ST
        光 波 长  :   1310/1550nm
        传输距离  :   20kM/40kM/80kM(SM)   2kM(MM)

    电口
       数      量  :  1(RS232/422/485可选)
       接口形式  :  RS232:        为DB9孔
                            RS485/422:为工业级4位端子。
       传输距离  :  RS232:20米
                          RS485/422:1200米
       拓扑结构  :  点对点

    其它
        供电电源:+12VDC/+24VDC/±48VDC/220VAC
        系统功耗:小于4W
        外形尺寸:105mm*36.5mm*76mm
        运行温度:-20℃~~+70℃
        存储温度:-40℃~~+85℃
        运行湿度:10%~~~95%(无凝露)
        安装方式:35mm DIN卡轨式,壁挂式
        IP30防护等级,全金属外壳。

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

推荐产品