XPON ONT series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions , The carrier- class FTTH application provides data service access.
XPON ONT series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
XPON ONT series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON
CTC3,0 and GPON Standard of ITU-TG.984.X:
Support EPON and GPON Mode, and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IPA
Support WIFI Interface and multiple SS
Product Features
● Support EPON and GPON Mode and switch mode automatically
● Support ONU auto-discovery/link detection/remote upgrade of software
● WAN connections support Route and Bridge mode
● Route mode supports PPPoE/DHCP/ static IP
● Support WIFI Interface and multiple SSID
● Support QoS and DBA
● Support port Isolation and port vlan configuration
● Support Firewall function and IGMP snooping multicast feature
● Support LAN IP and DHCP Server configuration;
● Support Port Forwarding and Loop-Detect
● Support TR069 remote configuration and maintenance
● Support CATV interface for Video Service
● Support POTS interface for Voip Service
● Specialized design for system breakdown prevention to maintain stable system
Product Specification
| Technical item | Details |
| PON Interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm RX: 1490nm |
| Optical Interface | SC/APC Connector |
| POTS interface |
1 FXS RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode DTMF Relay Line testing according to GR-909 |
| LAN Interface | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half RJ45 connector |
| CATV interface |
RF optical power : +2~-18dBm |
| Optical reflection loss: ≥45dB | |
| Optical receiving wavelength: 1550±10nm | |
| RF frequency range: 47~1000MHz RF output impedance: 75Ω | |
| RF output level: 78dBuV | |
| AGC range: 0~-15dBm | |
| MER: ≥32dB@-15dBm | |
| Wireless |
Compliant with IEEE802.11b/g/n |
| Operating frequency: 2.400-2.4835GHz | |
| support MIMO rate up to 300Mbps | |
| 2T2R2 external antenna 5dBi | |
| Support: multiple SSID | |
| Channel: Auto | |
| Modulation type: DSSS CCK and OFDM | |
| Encoding scheme: BPSK QPSK 16QAM and 64QAM | |
| LED | 12 For Status of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、 Internet、FXS、Worn、Normal(CATV) |
| Push-Button | 3For Function of Reset、WLAN、WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm（L×W×H） |
| Net Weight | 0.24Kg |
本产品为FT系列，如有需要，请联系我们。
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
